Model 1 Fumé
| MA | 0 of 5 | Movement architecture |
|---|---|---|
| MM | 0 of 5 | Movement manufacturing |
| EX | U unknown | Exterior manufacturing unknown |
| DH | 5 of 5 | Dial & hands manufacturing |
| CF | 4 of 5 | Craft & finishing |
| WE | 3 of 5 | Watchmaking execution |
| PD | 3 of 5 | Product development |
Not a ranking. Darker means more of the work is done inside the brand.
Evidence by dimension
MA 0Movement architecture: Stock third-party caliber
A Swiss supplier caliber. The workshop modifies movements "to our needs", but the modifications are not described, so they are treated as adjustment rather than architecture.
Supporting evidence (1)
Watches use Swiss movements from La Joux-Perret, Sellita and ETA.
Our watches run on good quality Swiss movements from La Joux-Perret G101, Sellita and ETA
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Supplier calibers.
Context (1)
Movements are modified, regulated and assembled into watches at the Glasgow workshop.
We receive them at our Glasgow workshop, where they are modified to our needs, regulated and assembled into cased-up watches.
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Unspecified modification.
MM 0Movement manufacturing: Complete movement external
The complete movement is bought in.
Supporting evidence (1)
Watches use Swiss movements from La Joux-Perret, Sellita and ETA.
Our watches run on good quality Swiss movements from La Joux-Perret G101, Sellita and ETA
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
External movements.
EX UExterior manufacturing: Unknown
No source names the case maker. U until found (handbook score was 0).
DH 5Dial & hands manufacturing: Defining, highly integrated dial/hand manufacture
Dial blanks are stamped from fine silver in Glasgow, enamelled, fired and printed by three named in-house enamellers, and the hands are heat-coloured. Dialmaking defines the watch.
Supporting evidence (5)
Dial blanks are stamped from fine silver in the Glasgow studio.
We start by stamping a dial from a sheet of fine silver using a hydraulic press and a custom-made die at our Glasgow studio.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
In-house blanks.
Three named enamellers make the enamel dials.
our three expert enamellers – Morna, Nicky and Sally – have spent years refining the practice of enamel dial making.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Named in-house enamellers.
Fumé dials use the same vitreous enamel method on a domed silver base.
With the fumé dial, we follow our existing enamel method, but using a domed silver base.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Fumé process.
Dials are fired, printed and cured before going to the watchmakers.
After enamelling, the dials are fired, printed and cured, then passed on to our watchmakers for assembly.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Firing and printing in-house.
Hands are thermally treated to specific colours.
Our watch hands are thermally treated to specific colours
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Hand colouring.
CF 4Craft & finishing: Advanced métiers d'art or haute-horlogerie finishing is a major capability
Vitreous enamelling is a métier d'art practised in-house by a dedicated team. It is a major capability, scored separately from dial manufacture.
Supporting evidence (2)
Three named enamellers make the enamel dials.
our three expert enamellers – Morna, Nicky and Sally – have spent years refining the practice of enamel dial making.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
In-house enamel team.
Fumé dials use the same vitreous enamel method on a domed silver base.
With the fumé dial, we follow our existing enamel method, but using a domed silver base.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Grand feu technique.
WE 3Watchmaking execution: Movement preparation/adjustment plus full assembly, regulation and testing
Movements are tested, sometimes modified, assembled and regulated by six in-house watchmakers.
Supporting evidence (4)
Each watch is hand-assembled by one of six in-house watchmakers.
Regardless of movement, each watch is carefully hand-assembled by one of our six in-house watchmakers.
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
In-house assembly.
Balance amplitude is checked on a timegraph before assembly.
Before assembly, the amplitude – the swinging rate of the balance wheel – is checked with our timegraph
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Movement testing.
Every watch is regulated after assembly.
Once assembled, every watch is regulated to suit the wearer.
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Regulation.
Movements are modified, regulated and assembled into watches at the Glasgow workshop.
We receive them at our Glasgow workshop, where they are modified to our needs, regulated and assembled into cased-up watches.
Watchmaking (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Modification.
PD 3Product development: Bespoke components and substantial supplier-directed development
Bespoke dials made with custom dies around conventional supplier movements.
Supporting evidence (1)
Dial blanks are stamped from fine silver in the Glasgow studio.
We start by stamping a dial from a sheet of fine silver using a hydraulic press and a custom-made die at our Glasgow studio.
Enamel (anOrdain)Primary source, manufacturer statementArchived copyChecked 13 Oct 2026Added by ai-draft
Custom-made die for the dial.
Who makes what
| Area | Component | Made by | Relationship |
|---|---|---|---|
| Movement architecture | Movement (Swiss supplier caliber, modified) | Unknown | External specialist |
| Movement manufacturing | Complete movement | Unknown | External specialist |
| Exterior manufacturing | Case | Unknown | Unknown |
| Dial & hands manufacturing | Dial blank, stamped from fine silver | anOrdain | Internal |
| Dial & hands manufacturing | Vitreous (grand feu) fumé enamel, firing and printing | anOrdain | Internal |
| Dial & hands manufacturing | Hands, thermally treated | anOrdain | Internal |
| Watchmaking execution | Movement testing, modification, assembly and regulation | anOrdain | Internal |
History
Version 2 13 Oct 2026, mikeqtn
First evidenced profile, from the maker's own watchmaking and enamel pages. Proposed: EX 0 → U (no source on the case maker). Other scores unchanged; confidence stays A. Reviewed and approved by mikeqtn on 2026-10-14.
Changed from version 1: EX 0 → U.
Compare with version 1
Version 1 and version 2 Version 1 Version 2 MA 0 of 5, Version 1 0 of 5, Version 2 Movement architecture MM 0 of 5, Version 1 0 of 5, Version 2 Movement manufacturing EX 0 of 5, Version 1 U unknown, Version 2 Exterior manufacturing changed DH 5 of 5, Version 1 5 of 5, Version 2 Dial & hands manufacturing CF 4 of 5, Version 1 4 of 5, Version 2 Craft & finishing WE 3 of 5, Version 1 3 of 5, Version 2 Watchmaking execution PD 3 of 5, Version 1 3 of 5, Version 2 Product development Version 1 13 Oct 2026, FALK v0.2 handbook (superseded)
Imported from the FALK Index v0.2 handbook §8 reference dataset.
Use this record
Handbook v0.2 §8 lists this record as "anOrdain — Model 1 Fumé".